Specifications for the LC-2100 Leak Noise Correlator
Main Processor Unit
- Input Mode: radio (cable if preferred).
- Radio Frequency: UHF under radio approval.
- Filter Range: High = 630, 1250, 2500, 5000Hz
Low = none, 80, 180, 380, 800 Hz - Correlation Mode Polarity
- Time Delay Range: 50, 100, 200, 400, 800, millisec.
- Summations: Up to 99 times, with random stop.
- Pipe Materials: Data for 10 kinds stored.
- Pipe Diameters: 91 sizes.
- Sound Variations: 91 in memory store, plus manual input.
- Pipe Variations: Max. 6 materials and/or sizes per run.
- Memory Function: 84 data.
- Monitor Mode: Stereo headphones.
- Printer Interface: RS-232C.
- PC Interface: RS-232C.
- White Noise Mode: Determines sound velocity in non-standard pipes.
- Power: 6 "C" batteries (rechargeable or std dry cells), 20 hours life.
- Size and Weight: 8.9 inches x 6.0 inches x 3.3 inches, 4.4 lb.
Red and Blue Pre-Amplifiers
- Output Mode: Radio (cable if preferred)
- Radio Frequency: UHF under radio approval.
- Frequency Ranges 20-10,000 Hz
- Sensitivity: Less than 100µV.
- Radio Mode Output: FM 100 mV.
- Cable Mode Output: Unbalanced 100 mV.
- Input Level: Analog Meter.
- Monitor Mode: Speaker or Headphones
- Power; 6 "C" batteries (rechargeable or std. dry cells), 30 hours life.
- Size and Weight: 7.9 inches x 4.2 inches x 3.1 inches, 3.3lb.
Printer
- Printing Mode: Serial dot thermal printer.
- Printing paper roll: Dia. 48mm roll, width 112mm.
- Interface: 8 bit parallel or RS-232C.
- Power: Rechargeable battery, 30 hard copy life.
Back to SubSurface Leak Detection